This high-quality, performance engineered diverter valve is designed to replace the factory plastic diverter valve, which is a common source of boost leaks. Unlike the OEM valves, which use a fragile rubber diaphragm that is prone to failure, the 034Motorsport Diverter Valve features a high-performance spring and piston design. This means that the valve lasts much longer, and is capable of handling increased boost pressure.

The 034Motorsport Bypass Valve is fully serviceable and rebuildable.

This high-quality, performance engineered diverter valve is designed to replace the factory plastic diverter valve, which is a common source of boost leaks. Unlike the OEM valves, which use a fragile rubber diaphragm that is prone to failure, the 034Motorsport Diverter Valve features a high-performance spring and piston design. This means that the valve lasts much longer, and is capable of handling increased boost pressure.

The 034Motorsport Bypass Valve is fully serviceable and rebuildable.

We're pleased to offer this high-temperature silicone replacement N75 Hose for the B5/B6 Audi A4 1.8T and B5/B5.5 Volkswagen Passat 1.8T! Each vehicle has two of these hoses! One hose runs from the N75 valve to the wastegate actuator, and the other hose runs from the N75 valve to the compressor housing.

Audi, VW, SEAT og Skoda MAP sensormonteringsrør

Vennligst skriv inn størrelsen på monteringsrøret i kommentarfeltet i kurven:

• 60mm diameter 110mm lang
• 60mm diameter 240mm lang
• 63mm diameter 110mm lang
• 63mm diameter 240mm lang

Vennligst skriv inn ditt valg for varmebestandig tape også:

• Med varmebestandig tape + £ 20.84 (eks mva)
• Uten varmebestandig tape

Dette komplette silikonslangesettet er designet for å erstatte all den smuldrende plasten og gummien som er fabrikkens lufteslangesystem. 034Motorsport Billet PCV tilbakeslagsventil er inkludert i dette settet!
 

Fully reinforced silicone breather hose is designed to replace the crumbling, leaking OEM rubber part. Prevent boost leaks and replace a common failure point with this durable, performance engineered part made from high-quality automotive silicone.

This hose runs from the bottom of the intake manifold to the check valve attached to the lower block breather hose.

Phenolic intake manifold spacer for the 1.8T, 10mm thick, includes 2 OE gaskets and longer hardware for an easy, quick install.

Phenolic intake manifold spacer for the 1.8T, 10mm thick, includes 2 OE gaskets and longer hardware for an easy, quick install.

Phenolic intake manifold spacer for the 1.8T, 10mm thick, includes 2 OE gaskets and longer hardware for an easy, quick install.

Audi B5 A4/S4/RS4 & C5 A6/Allroad 30v V6 (2.7T, 2.8L) Phenolic Intake Manifold Spacer, 5mm Thickness to Prevent Heat Conductivity to the Intake Manifold From the Cylinder Head.

Audi B5 A4/S4/RS4 & C5 A6/Allroad 30v V6 (2.7T, 2.8L) Phenolic Intake Manifold Spacer, 5mm Thickness to Prevent Heat Conductivity to the Intake Manifold From the Cylinder Head.

Audi B5 A4/S4/RS4 & C5 A6/Allroad 30v V6 (2.7T, 2.8L) Phenolic Intake Manifold Spacer, 5mm Thickness to Prevent Heat Conductivity to the Intake Manifold From the Cylinder Head.

This complete silicone hose kit is designed to replace all of the crumbling plastic and rubber awfulness that is the factory breather hose system.

The VW and Audi 1.8T engine, due to the proximity of the coils on the valve cover near the exhaust, suffer from harness degredation. Our harness solution uses automotive grade wiring and harness building materials designed to withstand years of abuse and offer an affordable, elegant solution.

From chassis number:3B-X-000-001
OEM-Partnumber: 0781 980 012C