This high-quality, performance engineered diverter valve is designed to replace the factory plastic diverter valve, which is a common source of boost leaks. Unlike the OEM valves, which use a fragile rubber diaphragm that is prone to failure, the 034Motorsport Diverter Valve features a high-performance spring and piston design. This means that the valve lasts much longer, and is capable of handling increased boost pressure.

The 034Motorsport Bypass Valve is fully serviceable and rebuildable.

This high-quality, performance engineered diverter valve is designed to replace the factory plastic diverter valve, which is a common source of boost leaks. Unlike the OEM valves, which use a fragile rubber diaphragm that is prone to failure, the 034Motorsport Diverter Valve features a high-performance spring and piston design. This means that the valve lasts much longer, and is capable of handling increased boost pressure.

The 034Motorsport Bypass Valve is fully serviceable and rebuildable.

Denne sekundære luftinjeksjonsplaten (SAI) er designet for 1,8 T sylinderhoder med det sekundære luftinjeksjonssystemet fjernet. Har 034Motorsport-logoen på den ene siden, og et presisjonsmaskinert o-ring-sete på den andre.

Vennligst merk: Fjerning av SAI-systemet vil føre til at kontrollmotorkoder, riktig programmering og / eller motstander kan være nødvendig for å slå av disse kodene. Kun for offroad-bruk.

The 034 check valve is a high quality spring-loaded ball-style unit designed for simple bolt-on installation for the Audi AAN I5 20VT, Audi/Seat/Volkswagen 1.8T, Audi 2.7T, and many others. Features a CNC-machined billet aluminum housing with stainless steel ball-bearing and spring.

034Motorpsort's billet PCV check valve serves as a simple, elegant, indestructible replacement for the problematic OEM Audi/Volkswagen plastic valve (035 103 245A).

Audi, VW, SEAT og Skoda MAP sensormonteringsrør

Vennligst skriv inn størrelsen på monteringsrøret i kommentarfeltet i kurven:

• 60mm diameter 110mm lang
• 60mm diameter 240mm lang
• 63mm diameter 110mm lang
• 63mm diameter 240mm lang

Vennligst skriv inn ditt valg for varmebestandig tape også:

• Med varmebestandig tape + £ 20.84 (eks mva)
• Uten varmebestandig tape

Fully Reinforced Silicone Replacement 1.8T PCV Check Valve T-Hose for Longitudinal and Transverse 1.8T Engines.

Precision Stamped and Bent 304 Stainless Steel Coil Cover With Hardware To Clean Up and Protect Your Audi & Volkswagen 1.8T Coil Packs From Extreme Heat.

034Motorsport's billet aluminum block breather adapter for the 1.8T is precision CNC machined in-house to ensure unsurpassed quality and perfect fitment.

Precision Stamped and Bent 304 Stainless Steel Coil Cover With Hardware To Clean Up and Protect Your Audi & Volkswagen 1.8T Coil Packs From Extreme Heat.

This complete silicone hose kit is designed to replace all of the crumbling plastic and rubber awfulness that is the factory breather hose system. Fits transverse 1.8T cars with engine codes AWV, AWW, and AWP through the 2002 model year.

Fully reinforced silicone breather hose is designed to replace the crumbling, leaking OEM rubber part. This hose runs from the bottom of the intake manifold to the check valve attached to the lower block breather hose.

Replaces OEM part number 06A 103 221BK.

Phenolic intake manifold spacer for the 1.8T, 10mm thick, includes 2 OE gaskets and longer hardware for an easy, quick install.

Phenolic intake manifold spacer for the 1.8T, 10mm thick, includes 2 OE gaskets and longer hardware for an easy, quick install.

034Motorsport's high-quality silicone PRV (Pressure Regulating Valve) Pipe to Turbo Inlet Hose for the MkIV Volkswagen Golf/Jetta/New Beetle & 8N Audi TT 1.8T is a direct replacement for the factory hose. The OE breather hose is a very common point of failure, and almost always rips when removing the turbo inlet hose or PRV. Constructed from 4-ply high-temperature automotive grade silicone, this will not crumble apart or rip like the factory rubber hose.

Replaces 06A 103 221 BR.

Phenolic intake manifold spacer for the 1.8T, 10mm thick, includes 2 OE gaskets and longer hardware for an easy, quick install.

Reinforced silicone breather hose for Mk4 1.8T, runs from the lower block breather hose to the small nipple on the valve cover breather port.

Fully reinforced silicone 1.8T lower block breather hose to replace the crumbling factory plastic and rubber lower breather hoses. This hose fits numerous transverse engine configurations among Volkswagens and Audis.

Fully reinforced silicone transverse 1.8T valve cover breather hose to replace the crumbling rubber unit. 

This hose replaces the stock valve cover breather y-hose on Early AWP (1999-2002) MkIV Volkswagen 1.8T models. Early cars have a 20mm nipple on the valve cover, while late cars have a 25mm nipple.

The VW and Audi 1.8T engine, due to the proximity of the coils on the valve cover near the exhaust, suffer from harness degredation. Our harness solution uses automotive grade wiring and harness building materials designed to withstand years of abuse and offer an affordable, elegant solution.

En avblåsnings- eller resirkuleringsventil (det være seg stempel, membran eller OEM) vil bli aktivert av vakuum eller elektrisitet, og er designet for å forbedre kjøreegenskapene til kjøretøyet ditt, noe som gir deg maksimal effekt når du vil ha det. Alle typer er avhengige av en intern fjær for å opprettholde en tetning slik at du har boosttrykk når det trengs - Hvis fjæren er for svak, mister du kraften.

VW Golf IV Cabriolet (1E7)
Engine code AKR, AGG
VW models with 2.0l engine and 79-85kW
From year: 02.1990 - 03.2010